Eng. 4358-3340Awww.djgusa.comRead all instructions BEFORE USING this child restraint.KEEP INSTRUCTIONS FOR FUTURE USE.Para recibir las instrucciones e
16WARNING:Failure to fasten and tighten the harnesssystem correctly and snugly can result inserious injury or death.5Position the harnessretainer at m
19Removing Your Child From theChild RestraintPress on release button andpull apart.13Push down on harnessrelease button while pullingup on harness str
20PULL TO RECLINEThis child restraint has 3recline positions whenused with the base:Upright and Semi-reclined(forward facing only) andReclined.Rear-fa
Not all vehicle belts will work with this child restraint.You must determine if your vehicles belts are compatiblewith this child restraint. If you wi
241234Thread both vehicle lapand shoulder belts throughthe slot (as shown) andout other side. Buckle.Pull up on shoulder beltuntil all slack is out an
26You may need to removethe base for narrow vehicleseats or airline use. See“Removing Base” in Belt-Positioning Boostersection.To use the child rest
28With weakest hand at beltpath, tilt and push the childrestraint forward and back,and from side to side. Ifthe seat belts do notloosen, your child re
304Push LATCH hookthrough the rear-facingbelt path slot.Push LATCH hookthrough the other rear-facing belt path slot.6Put seat pad back overcorners of
With weakest hand at beltpath, tilt and push thechild restraint forward andback, and from side toside. If the LATCH beltsdo not loosen, your childrest
34After deciding whether to use your Vehicle Belts orLATCH, be sure to read the warnings below as theypertain to both systems.Forward-Facing Installat
Thank you for choosing this car seat, referred tothroughout this manual as a child restraint.The DJGfamily is committed to creating a child restraint
36With weakest hand at thebelt path, tilt and push thechild restraint from sideto side. If the LATCHbelts do not loosen, yourchild restraint should be
384Place one knee in the childrestraint and push downfirmly while pulling up onthe loop to tighten belt.Connect top anchoragestrap to the anchorbracke
4041Belt-Positioning Booster Use: 30-100 lbs. (14-46 kg), 29-52” (73-132 cm), Over 1 year of age.Refer to the Weight andHeight Chart to makesure your
42Move seat to fullyreclined position. Pushdown on tab on rightside of base (A).From the other side,push on bar (B) and pullthe bar completely out.Bas
445Insert metal clip upthrough the shell and pad.4From bottom of seat,locate buckle’s metal clip.45Belt-Positioning Booster Use: 30-100 lbs. (14-46 kg
46WARNING!For vehicles with an airbag, but without a backseat, refer to your vehicleowner’s manual.Do Not Use only the lapbelt when using this seatas
4854Fit loops on harness endsonto the harness bracket.Pull harness through theback. Make sure theharness goes OVER theheadrest adjustment bar.WARNING!
50From the back, use ascrewdriver to press in onlip of upper harness guidesand pop guides through thefront. Pull cover offheadrest.Clean with warm sud
5253Warranty Dorel Juvenile Group, Inc. (DJG) warrants this product to theoriginal retail purchaser as follows:This product is warranted against defec
WARNING!According to accident statistics, childrenare safer when properly restrained in therear seating positions than in the frontseating positions.N
4WARNING!Do not use this child restraint if themidpoint of your child’s head is above thetop of the child restraint’s headrest.Dorel Juvenile Group do
6Your vehicle’s features may be considerably different thanthose pictured here. Consult your vehicle owner’s manualto help identify your vehicle’s spe
8Child Restraint PartsA. Headrest/HarnessAdjusting LeversB. Pillow C. Adjustable HeadRestD. Infant InsertE. Harness Covers F. Harness Retainer G. Buck
10Choosing Restraint and PositionYour child’s height, weight and age determine how yourchild restraint should be placed in the vehicle and whichrestra
Preparing Child Restraint to Fit Your Child23Press on harness retainerrelease button and pullapart.Loosen harness by pushingdown on the harnessrelease
Infant Insert (optional):When using insert (A),make sure insert does notcover your infant’s face inany way. Remove the insertfor older babies andtoddl
Kommentare zu diesen Handbüchern