4358-5258 onSide Air 6/4/10 9:48 AM Page 1Meijer.com
Check Harness HeightWith child in the childrestraint,check the locationof the harness slot.Follow the guidelines belowto determine the correctharness
C.Basic UseC-3 Securing Child in Child RestraintPosition Harness Straps Over the Child’s Shoulders.1.Buckle Harness Push each buckle tongueinto buckle
C.Basic UseC-4 Removing Child From Child RestraintC-5 AccessoriesLoosen Harness Press on harness releaselever while pulling onharness straps above the
2322C.Basic UseRemove Harness Strapsfrom Splitter Plate Fully loosen harness straps.Locate splitter plate on theback of the child restraintand unfaste
Replace child restraint pad by reversing order; Starting frombottom of child restraint, slip pad on plastic shell; pullharness tightening strap throug
3.C.Basic Use26 27NOTE: Make sure harnesstightening strap is betweenthe harness strap andplastic shell as shown.Harness system must be reattached corr
2928Your vehicle’s features may be considerably different thanthose pictured here. Consult your vehicle owner’s manual tohelp identify your vehicle’s
Vehicle Belts If LATCH is not an option,you must use the vehicleseat belt system to installthe child restraint.There aresome vehicle belts that willno
• Switchable retractorThese vehicle belts switch from ELR to ALR (AutomaticLocking Retractor). You must have the vehicle belts in thelocking mode to u
3435E.Installing Rear-FacingE-2Preparing to Install LATCHRear-FacingUnhook LATCH fromSide of Shell Remove the LATCH fromthe forward-facing beltpath.1.
11 in 4 car crashes involving children are sideimpact collisions. They are by far the deadliesttype of collision for children, accounting for 1in 3 ch
3736E.Installing Rear-Facing4360-0681Line to be Level To GroundRear-Facing Only4360-0681Line to be Level To GroundRear-Facing OnlyPlace Child Restrain
3938E.Installing Rear-Facingcontinued on next page.E-4Install Rear-Facing with Vehicle BeltsDo not use the LATCH system along with thevehicle lap or l
40E.Installing Rear-Facing41Tighten Vehicle BeltPush down firmly on thechild restraint and pull onthe vehicle shoulder belt totighten.It maybe easier
4243F.Installing Forward-FacingF-1 Preparing to Install Forward-FacingLap BeltLATCH BeltLap/Shoulder Belt22-40 lbs (10.1-18 kg) and 34-43 in. (85.1-11
4445F.Installing Forward-FacingF-3 Preparing to Install LATCH Forward-FacingRouting LATCH Belt Insert the LATCH hookwith the adjuster closestto it, t
4647F.Installing Forward-FacingCheck LATCH BeltTightness Grasp the child restraint atthe belt path with onehand. Push and pull the childrestraint fr
F.Installing Forward-Facing49continued on next page.F-5Install Forward-FacingWith Vehicle BeltsSecure LATCH BeltsYou MUST store the LATCHbelt hooks to
50517.Check Vehicle BeltTightness Grasp the child restraint atthe belt path with onehand. Push and pull thechild restraint from side toside, forward
525312Pull Vehicle Belt AcrossChild Restraint Thread vehicle seat beltunder pad in front of bucklestrap to the opposite side.Buckle vehicle belt.Do no
5455G-3 WarrantyDorel Juvenile Group, Inc.(DJG) warrants this product to the originalretail purchaser as follows:This product is warranted against def
32E-1 Preparing to Install Rear-FacingE-2 Preparing to Install LATCH Rear-FacingE-3 Install Rear-Facing with LATCHE-4 Install Rear-Facing with Veh
5756Replacement Parts ListNOTE: If requested color is not available, similar color will besubstituted.Part Cost Quantity Total CostBuckle Strap/Buckle
4Thank you for choosing this car seat, referred to throughoutthis manual as a child restraint.The DJG family is committedto creating a child restraint
PUSH6A. Harness SlotsB. Harness SystemC. Cup Holder(on select models)D. Harness ReleaseLever (under flap)E. Harness Tightening StrapA-3 Understanding
4360-0681Line to be Level To GroundRear-Facing OnlyBack ViewN. LATCH Connector(under pad)O. Top AnchorageStrap (Tether) P. Locking Clip (behind harnes
1011B-3 Child Restraint UseNever take your child out of the childrestraint while the vehicle is moving. Neverleave child unattended.Placing your child
C-1 Choose Position for Your ChildYour child’s height, weight and age determine how your childrestraint should be placed in the vehicle.5-40 lbs (2.3-
C.Basic UseCheck Buckle Position Determine which of theavailable buckle positionswill be comfortable andprovide a snug fit for your child.5.1415From t
Kommentare zu diesen Handbüchern